Star Trek Discovery Bundle - Phaser Rifle Tricoder - Printable - STL files 3D Принт Модель

Hi! We glad introduce 3d model - STL files to print your own Star Trek Discovery Bundle, that includes: Starfleet Rifle, Phaser Pistol, Tricodet with Communicator and Scanner.

• Lot include:
  

- Starfleet Rifle Discovery with demo stand - Printable 3d model (http://3dexport.com/3dmodel-starfleet-phaser-rifle-star-trek-discovery-printable-stl-files-426608.htm)
- Phaser Discovery with demo stand - Printable 3d model (http://3dexport.com/3dmodel-discovery-phaser-star-trek-printable-stl-files-426602.htm)
- Tricodet with Communicator and Scanner - Printable 3d model (http://3dexport.com/3dmodel-star-trek-discovery-tricoder-and-communicator-star-trek-printable-stl-files-426611.htm)
- 91 stl files to 3d print Starfleet Rifle(biggest part: 183*60*46 mm).
- 4 stl files - stand for Starfleet Rifle.
- 41 stl files to 3d print Phaser Pistol (biggest part 164*47*40mm).
- 3 stl files 3 tipes of stands for Phaser Pistol.
- 58 stl files to 3d print Tricodet with Communicator and Scanner(biggest part demensions: 150*100*52mm).
- 1 stl files stand for Communicator.
- Digital Instructions for assembling.
- Lists of components you will needs for assembling.

• Starfleet Rifle:
  

List of components needs for assembling Starfleet Rifle with LEDs lighting:

- 3-4mm LEDs
- 22 ohm resistors
- battery shrapnel AAA (21*9mm + 10*9mm)
- 8*8mm button switch
- M3 screws
- wires
- insert nuts 3*5*4mm – 2 pcs

The model assumes demo stand and the presence of LED backlight.

Dimensions of Starfleet Phaser Rifle: 642.16 mm x 246.06 mm x 77.82 mm

• Phaser Discovery
  

List of components needs for assembling Phaser Discovery with LEDs lighting:

- 3-4mm LEDs
- 20-30 ohm resistors
- AAA batteries slot
- 8*8mm button switch
- M3 screws
- wires
- round magnets (10*5mm and 10*2mm)
- batteries shrapnel AAA
- 2 pcs insert nuts 3*5*4mm

The model assumes demo stand and the presence of LED backlight.

Dimensions of Phaser Pistol: 218.75 mm x 163.4 mm x 52.6 mm

• Tricodet with Communicator and Scanner
  

List of components needs for assembling Tricodet with Communicator and Scanner with LEDs lighting:

- 3-4mm LEDs
- 20-30 ohm resistors
- 1xAAA and 1xCR2032 batteries slots
- 8*8mm button switch
- M3 screws
- wires
- round magnets (10*5mm and 8*1.5mm)
- batteries shrapnel AAA

The model assumes demo stand for communicator and the presence of LED backlight.

Tricoder Dimensions: 150 mm x 100 mm x 65.6 mm
Scanner Dimensions: 99 mm x 38 mm(D) Wide 39.6 mm with button
Communicator Dimensions: 110 mm x 60 mm x 19.2 mm

If there is a different design you would like have, and don't see it in our list of products. Then please do not hesitate to contact us, and we will see what we can do.

Legal notice
This is not an officially licensed product and is only considered Fan Art, the item is 3D model designed for fan art by me.

FOR PERSONAL USE ONLY. NOT INTENDED FOR COMMERCIAL PRINTING.